Meta Ads Inactive or Partial Delivery? Fixes (2026)
What do Inactive and partial delivery mean in Meta Ads Manager?
Inactive means a campaign, ad set or ad isn't running, usually because it finished or a related item was turned off. Meta's Delivery column has no status called partial delivery: a Warning icon means limited delivery, and Ads off or Ad set off means the parent is on while a child is off (Meta, as of 14 Nov 2026).
A campaign that shows Inactive is not broken in most cases: Meta uses that label for anything that is not running right now, and the cause is almost always a switch somewhere in the campaign, ad set and ad chain, or an end date that has passed. What people call “partial delivery” is not a status Meta lists. It maps to three different things in the Delivery column, and each has its own fix.
Everything below comes from Meta’s help article View campaign, ad set or ad delivery status in Meta Ads Manager and its learning-phase article, read on 14 Nov 2026.
What does Inactive mean in Meta Ads Manager?
Meta defines Inactive as: “The campaign, ad set or ad isn’t running. This is usually because it’s been completed or because a related campaign, ad set or ad has been turned off.” It is one of five icon meanings in the Delivery column, next to Error, Warning, Pending and Active.
Meta also notes that campaigns, ad sets and ads can each carry a different status. A campaign can look active while an ad set or ad below it shows In review after a recent edit, so check all three levels when something is not delivering.
Does Meta have a “partial delivery” status?
No. We searched the Delivery column’s icon list and its status table on 14 Nov 2026, and neither contains “partial delivery” or “partially active”. Three real statuses cover what people mean by it:
- Warning icon: Meta says the item “is experiencing limited delivery. Addressing this warning may improve performance.” Hover over it for the reason.
- Ads off or Ad set off: the campaign toggle is blue (on), but the ad set or ad below it is off.
- Active on a parent: Meta says a campaign or ad set shows Active when it contains at least one ad running normally. Other ads inside it may still be off, in review or rejected.
What does each Delivery status mean and how do I fix it?
| Status | What Meta says it means | Fix |
|---|---|---|
| Inactive | Not running: completed, or a related item is off | Turn on the parent and child items that are off; if completed, change the schedule |
| Ads off / Ad set off | Campaign is on, but the ad set or ad below is off | Switch the ad set or ad toggle to blue |
| No ads | The campaign or ad set has no published ad | Create and publish an ad in it |
| Completed | The scheduled end date has passed | Edit the end date or duplicate the item with a new schedule |
| Scheduled | The ad set runs at a future date | Wait, or edit the ad set’s schedule |
| In review | Ad is being checked against Advertising Standards | Wait; it becomes active after review |
| Processing | Changes are being applied, usually minutes, up to 8 hours | Wait before editing again |
| Preparing | Passed review; the system is matching bid and audience | Wait for the first impression |
| Rejected | The ad does not comply with Advertising Standards | Hover for the reason, then edit the ad to comply |
| Learning | The ad set is still in the learning phase | Avoid edits until it exits |
| Learning limited | Too few results to exit the learning phase | Combine similar ad sets; use a realistic budget |
Meta adds that you can hover over some statuses, such as errors and warnings, to see more detail and any action to take. The fixes for Completed and Rejected are our reading of the definitions; Meta’s table gives the meaning, not a step list.
How do I fix an Inactive campaign, ad set or ad?
- Open Ads Manager and look at the Delivery column for the campaign, ad set and ad in turn. Meta says to check all three levels.
- Find any toggle that is grey. Meta shows Off in the Delivery column when the item itself is off; switch it to blue.
- Check the end date in the ad set’s Schedule. If the status reads Completed, the scheduled end date has passed, so edit the schedule.
- Open the Ads tab and confirm at least one ad is published. A campaign or ad set without one shows No ads.
- Hover over any Warning or Error icon in the Delivery column and follow the action Meta shows.
- Give a recent edit time to process, then check again. Meta says some updates take up to 8 hours.
If the account was stopped rather than the campaign, the cause sits one level up; see why is my Meta ad account restricted from delivering?.
How do I fix limited delivery and Learning limited?
Learning limited is the limited-delivery status Meta documents by name: the ad set is not getting enough results to exit the learning phase. Meta says ad sets usually exit after about 50 results in the week after the last significant edit, and its learning phase article lists what to do:
- In Ads Manager, select the ad set and add the Last significant edit column through Columns. It shows when a change last reset learning.
- Check the Results column against about 50 in the week since that edit.
- Combine similar ad sets, which pools their learning and budget.
- Set a realistic budget; Meta says a very small or inflated one gives the system a poor signal.
- Hold edits until the ad set leaves the learning phase, since edits during learning reset it.
Meta also says auction overlap between ads from the same advertiser can limit delivery. The six documented causes, with checks, are in why is my ad set Learning limited?.
Why is a campaign Active but not spending?
Active only means the item is on and eligible. If it is Active with little or no spend, work through the spend-side causes in how do I find the fault when Meta ads under-deliver? and why did my Meta ads delivery drop?. The pillar page Facebook ads delivery and spend maps the rest.
Can Bach.ai flag these delivery problems?
Partly. Bach.ai is our product. It audits a connected Meta ad account and flags audience saturation and ad sets stuck in Learning limited, with an estimated recoverable spend figure. It does not replace the Delivery column, and the estimate is not guaranteed revenue. Starter is $99/mo and Pro $149/mo, each including $10k/mo of ad spend, then 1% (Starter) or 1.5% (Pro) of spend above $10k; at $30k a month Starter is $99 + 1% × $20k = $299. Free is a 7-day trial with no card. Applying a change needs a paid plan and your approval. See the Meta ads audit checklist for the manual route.
FAQ
Is Inactive the same as paused?
Not exactly. Meta describes Inactive as “isn’t running”, usually because the item completed or a related campaign, ad set or ad is off. An item you turned off yourself shows Off in the Delivery column. A parent can read Inactive because a child it depends on is off (Meta Help Center, as of 14 Nov 2026).
Why does my ad set say Inactive when the ad is on?
Delivery needs the whole chain on: campaign, ad set and ad. If the ad is on but its ad set or campaign is off, or the ad set’s end date has passed, the ad cannot run. Check the toggle and the Delivery status at each level in Ads Manager, starting from the campaign.
How long does Processing or In review take?
Meta says Processing usually takes a few minutes, though some updates take up to 8 hours. For In review, its table says only that the ad is checked against Advertising Standards and then becomes active as scheduled. It gives no review time on that page (as of 14 Nov 2026).
Does Learning limited mean my ads are being penalised?
Meta’s wording is that the ad set “didn’t generate enough results to exit the learning phase”. It describes a data shortfall, not a penalty. Performance is less stable while an ad set is in learning, and CPA is usually worse, so consolidating ad sets is the documented first step.
Sources
Sources: Meta Business Help Center, View campaign, ad set or ad delivery status in Meta Ads Manager and About the learning phase, both read 14 Nov 2026; Understand auction overlap; Bach.ai’s own pricing page (checked 14 Nov 2026).